New Information about Smoke Alarms!

The Longmont Fire Department cares about your safety. Free smoke detectors are given to parents of newborns, senior citizens, and people who cannot afford them. For more information, please call (303) 651-8437.
Smoke alarms aren't new.
The technology
has been around since the 1960's. The single-station, battery-powered smoke
alarms, similar to the one we know today, became available to consumers
in the 1940's. NFPA estimates that 93% of U.S. homes have at least one smoke
alarm. They save so many lives that most states have laws requiring them
in residential dwellings. So, why is all the attention being paid to smoke
alarms?
Still a Major Problem
Although 13 of every 14 homes have at least one smoke alarm, almost half
of home fires and three-fifths of fire deaths occur in the homes with no alarms.
Thousands of people still die each year in home fires where smoke alarms
aren't present.
In addition, there are now more homes with smoke alarms that don't work
than homes without alarms at all. These poorly maintained units create
a false sense of security among occupants, and hundreds of people die each
year in these fires.
Tragically, the grave importance of installing and maintaining smoke alarms has not yet been fully realized. Most people who die in home fires are not
in the room where the fire starts; working smoke alarms alert people to
fire and give them time to escape in a situation where minutes can mean the
difference between life and death.
Working Smoke Alarms Save Lives
Having a smoke alarm cuts your chance of dying nearly in half if you have
a home fire. By properly placing, regularly testing and maintaining your alarms,
you can ensure that they are in fact working and will alert you if a fire
breaks out. Make sure you buy only those alarms that bear the mark of an
independent testing laboratory. Some detectors operate using an "ionization"
sensor while others use a "photoelectric" sensor. An ionization
detector uses an extremely small quantity of radioactive material to make
the air in the detector chamber conduct electricity. Smoke from a fire interferes
with the electrical current and triggers the alarm. A photoelectric detector
uses a tiny light source shining on a light sensitive sensor. The alarm is
triggered when smoke from a fire interferes with the light. All tested and
labeled smoke alarms offer adequate protection if it is properly installed
and maintained.
No Substitute for Smoke Alarms
Fire protection in the home must start with smoke alarms. There are many
other kinds of alarms which may be designed to detect such factors as high
temperatures, rapid changes in temperature, and certain gases produced in
fires. However, these detectors are not as effective as smoke alarms in
giving the first warning when a fire breaks out. NFPA does not require heat
detectors give the first warning when a fire breaks out. NFPA does not
require heat detectors in homes, however, they may be used for optional extra
protection in areas like kitchens, attics, and garages, where smoke alarms
are susceptible to nuisance alarms.
Tests performed on the speed of warning given by smoke alarms and heat
detectors for many types of typical home fires showed smoke alarms consistently
give first warning--often by enough of a margin to make a major difference
in your chances of escaping alive. Smoke and deadly gas spread farther and
faster than heat.
Contrary to popular belief, the smell of smoke may not wake a sleeping person.
Instead, the poisonous gases and smoke produced by a fire can numb the senses
and put one into a deeper sleep.
PLEASE BE SAFE AND USE SMOKE ALARMS!
For additional information regarding smoke alarms please email or call (303)651-8831.
-->